• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 686 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TS3A27518E-Q1: About switching application of SPI-Flash signal

Tsukui Yusuke
Guru 21930 points
Part Number: TS3A27518E-Q1
Other Parts Discussed in Thread: TS3A27518E

Hi,

Let me talk about how to use TS3A27518E-Q1.
Customer is trying to use TS3A27518E-Q1 with the configuration of the attached file.

TS3A27518Q1.pdf

1．Customers want to switch between SPI-Flash 1 and 2.
　  Is it possible?
 　 Do you have a track record of attached circuit configuration?

2．If NC and COM are "ON" and the FPGA side is "Hi - Z", what happens to the NC side?

Could you give me your advice?　  

Best Regards,
Yusuke / Japan Disty

  • 0
    TI__Mastermind 45350 points
    Yusuke-san,

    1) Many customers use the TS3A27518E device for SPI multiplexing applications. It is possible to use it in the configuration shown in the TS3A27518E-Q1 datasheet.


    2) When the TS3A27518E-Q1 device is "ON" it creates a low impedance series path from COM to NC/NO. What ever voltage is see on COM will be seen on NC/NO. If the FPGA is Hi-Z on NC side the COM side will see a Hi-Z from the FPGA through the "ON" path of the switch creating the series low impedance path.

    Let me know if this answers your question.

    Thank you,
    Adam