• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 473 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TS3A24159: Drawing references ball A3 instead of A1

Sharda Persaud
Prodigy 155 points
Part Number: TS3A24159

Regarding TS3A24159YZPR, we noticed that the drawing references ball A3 instead of A1. Will the physical marking indicator on the part still reference A1?

  • 0
    TI__Mastermind 45350 points
    Sharda,

    The physical marking indicator on the part will reference A3 NC2 pin. The device is symmetrical about the long axis so electrically there shouldn’t be any issue assembly as long as you have the PCB assembled with the part marking oriented with row A.

    Thank you,
    Adam