• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 381 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC1G3157: SN74LVC1G3157DCKR decoupling cap?

Farshad Farahbakhshian
Prodigy 330 points
Part Number: SN74LVC1G3157

 

Can you please let us know if the device requires any particular Vcc to GND decoupling cap.? I could not find any info neither on its datasheet nor app. note.

Thank you

  • 0
    TI__Expert 3900 points
    Hi Farshad,

    In general it is good practice to place a decoupling capacitor on your supply pins of a device. Typical rule is to use a 0.1uF ceramic capacitor for logic devices, muxes, op amps etc. You can place more decoupling caps on your supply pin as well depending on your application needs.

    Hope this helps!