This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

CCS/AM4378: CCS8 uboot xds200 , Load Memory failed, Target failed to write 0x402F0400

Prodigy 10 points

Replies: 1

Views: 87

Part Number: AM4378

Tool/software: Code Composer Studio

Hi Sir,

I use xds200 \ CCS8(ubuntu16.04) to debug uboot base MYIR's board. Mpu is AM4378, uboot is from MYIR's web,  CCS8 compile uboot OK; but can't Load  u-boot-spl.bin to  Memory ( Tools->Load Memory ).

 

Does anyone know why?

Thanks.

  • Hi Luo,

    Note that on PG 1.2 devices, the correct load address is 0x402f4000, check AM437x TRM section 5.2.3.2 Public L3 RAM Memory Map

    If your AM437x device is PG 1.2 you should use 0x402f4000 instead of 0x402f0400. Check also below e2e thread:

    e2e.ti.com/.../763499

    Regards,
    Pavel



This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.