This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

[FAQ] CCS: Command Line Uniflash - Erase Only

Intellectual 410 points

Replies: 2

Views: 199

Part Number: TM4C1294NCPDT

Hi Guys, I would like to erase the chip using uniflash command line. I am able to do this with GUI (so I know my hardware and connections are good). The command I am using is as below.

 ./dslite.sh -c user_files/configs/tm4c1294ncpdt.ccxml -l user_files/settings/generated.ufsettings Erase

Erase is a valid option when I use --list-ops switch. What am I missing, what is the correct syntax for erasing without programming the chip?

Thanks,

Rajah

  • Guru 304080 points

    Hi Rajah,

    If you are just looking to erase the entire flash (like you would do with the "Erase Flash" button, then you can do something like:

     ./dslite.sh -c user_files/configs/tm4c1294ncpdt.ccxml -a Erase

    Thanks

    ki

    -----------------------------------

    Did you read the CCS Forum Guidelines & FAQ? If not, PLEASE read it. If you haven't read it in awhile, please read it again to see if any updates were made.

    Having CCS problems? Check out the CCS Troubleshooting Guide

    Looking for CCS Training/Documentation? Check out the CCS Resources page

    Curious about the status of a bug and know the tracking ID? Track it via the public bug tracking portal

    NOTE: When a bug is filed and a tracking ID is provided, the thread may then be suggested as "TI Thinks Resolved". Why? Please read the first FAQ of the CCS Forum Guidelines & FAQ

  • In reply to Ki:

    Perfect!!! This worked. The help text is not very clear.

    Thanks,
    Rajah

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.