This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: OPA320
Tool/software: TINA-TI or Spice Models
Hi,I want to simulate the OP320 in LTSpice. I know TI does not support LTSpice but there are reasons for us to use LTSpice intead of TINA. Also simulating OPA2192 in LTSpice was successful.It looks as if the results for DC anslysis are ok. But AC analysis results look strange. The test circuit is a Sallen-Key low pass filter. If the supply voltage is 5V (single supply) AC analysis result is correct. If supply voltage is 3.3V then AC analysis result is wrong. Doing the same simulation with OPA2192 all the AC analysis results are ok.Attached are two print screens showing both 5V and 3.3V supply case and corresponding AC analysis results.Any ideas what might be the problem?Thanks and best regards,Patrick
I tried your circuit in TINA and didn't find a discernible difference in AC response between 3.3V and 5V operation.The plots appear below and the TINA schematic file is attached.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to John Miller - WEBENCH Design Center:
Thanks for testing in TINA. I did test it as well with TINA, no problems so far. Unfortunately this does not help me much.What I have seen is that in a short transient analysis (sine wave 1kHz, 1.5V offset, 0.5V amplitude) the OPA320 model output shows some kind of settlement in the first 0.1us from half of the supply voltage, where as the OPA2192 (OPA192) output starts right from 1.5V. Maybe this has to do with the implemented shutdown function in the OPA320 and this maybe affects the AC analysis in LTspice (?).Regards,Patrick
In reply to Pruf:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.