This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: WEBENCH® Design Tools
when i connect my oscilloscope probe in between any two point of ground of pcb i observe this swithcing noise. i have ground plan on my pcb . and also decoupling caps connected . how to reduce this swithcing noise
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Gerold Dhanabalan - Online Design Tools:
Can you please get back to us on what was the source for the design?
no its not related to any design on evm or tian ti or web bench . its the schematics designed by my self will it be ok if i upload the schematics and the points at which i connect my oscilloscope probe
In reply to nikul panchal:
We would recommend to post your queries / design / schematic or any other details on the appropriate e2e forum (based on major ICs you are using in your design).
Thanks & Regards,
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.