This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

TINA/Spice/SN74AUP1G34: Request SPICE model for SN74AUP1G family output

Part Number: SN74AUP1G34

Tool/software: TINA-TI or Spice Models

I would like to request an unencrypted spice model for the output of this family of parts. I have tried to use IBIS2spice but get errors (*DEFINE {RTF}=??bad rtr/rtf value??) when attempting. 

I'm driving a complex load impedance and wish to simulate driving it using a reasonable approximation of the driver Cpd etc.

Best regards,

Doug

  • Hi Doug,

    Please bring this modeling need to your local TI sales representative. If you don't have a contact, please send an email to support@ti.com.

    Herman
  • In reply to Herman Theodorus:

    They are the one's who sent me to e2e in the first place.
  • In reply to Douglas Webb:

    Hi Doug,

    Sorry about that. Would you please send this thread to them? I can sync up with them offline.

    Thanks,
    JC
  • In reply to JC Zhu - Simulation Models for Product Folders:

    Hi Doug,

    We have not heard back from you, so I am hoping this issue has been resolved. We will close this request, but feel free to respond back if you have any additional follow-ups.

    Nikhil Gupta | Product Folder Modeling                                                                                                                                                    

    All TI Spice Models can be found here | New to TINA-TI? Its a free spice simulator! Try out this short Video Training Series

     

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.