• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 251 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Masking CAN Messages

TINA/Spice/TMS570LS1227: can

ks prasad
Expert 1255 points
Part Number: TMS570LS1227
Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

hi alexander ,

please can you provide the sample code for setting message filter and , after receiving the can data, how to check the id wether matched or not .  

thanks and regards,

K Subrahmaniam

  • 0
    TI__Guru**** 186196 points

    Hello KS,

    Since your question is related to TINA simulation, you will get more help from tool/simulation forum. I will move this thread to tool/simulation forum

  • 0 in reply to QJ Wang
    TI__Genius 9775 points

    Hi K Subrahmaniam,

    We have questions for your post:

    1. You mention about somebody named Alexander. Are you alluding to another post? If you do, could you please post that discussion on this post? ... since I have no idea what you are referring to.

    2. The part you mentioned here is DSP processor. Usually we don't do TINA/Spice simulation with DSP Processor. Do you have question about DSP processor itself or do you have questions about TINA-TI or spice simulation that is usually geared for analog product simulation rather than DSP processor.

    Herman

  • 0 in reply to Herman Theodorus
    TI__Genius 9775 points

    Hi KS,

    Since we haven't received a reply from you in a while, i am going to close this post and if you have further inquiry, please do not hesitate to open a new thread/post.

    Herman