This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TIDA-01573
Tool/software: WEBENCH® Design Tools
Hello,I'm, working on some device in automotive and I would like to use your products (TIDA-01573 - Nanosecond Laser Driver Reference Design for LiDAR, OPA857EVM-978 - OPA857 Bandwidth Extension Evaluation Module and ADC12J1600EVM - ADC12J1600 12-Bit, 1.6-GSPS, RF Sampling Analog-to-Digital Converter Evaluation Module) into it. I'm preparing this device in 3D software, so I need the 3D data of your products to my work, but I can't find any 3D data on sides of your company. If you have any 3D data, can you send me it please?Best regards,Jakub Nigut
In reply to Jeffrey Mueller:
Hello Jeff,Thank you for the data. I would like to ask you few more questions about mounting of this PCB. I suppose that PCB should be fully mounted without any degrees of freedom. Next I suppose that these 3 red marked connectors serve to the mounting of PCB, but they removing only 2 degrees of freedom.Can you tell me how can I fully fix the PCB? Do you have some holder for it, or some screws?Best regards,Jakub
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Jakub Nigut:
Thanks for the follow up question,
Were you planning on removing the 3 circled components? or using the screw connector terminal to secure it in place?
It might be possible to remove the bumpons and drill a hole through the corners of the board to mount it to something with screws.
Hi Jeff,Thank you for answer and for suggested solution. I will thinking about it.Best regards,Jakub
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.