This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TIDA-00067
We are intended to prove PLC communication between devices which is currenty RS 485 active on them.
I am looking for;
1) PLC on 48 VDC, but the DC will be changing 40V to 60V
2) Bit rate is 115200.
3) Transmission distance is about 0,6 meter.
4) Support UART input and UART output. That is, UART to PLC or PLC to UART.
I need suggestions and software information in order to start my work.
Please take a look at TIDA-060001. Hardware files are given and software is open-source which will allow you get started quickly.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.