CCS/TIDA-01604: control card

jaeyup jung

Part Number: TIDA-01604

Tool/software: Code Composer Studio

If I do a CCS Debug on the TIDA-01604's control card, does the PFC program be saved even if the USB power is not turned on?
If not, please let us know if you need to specifically modify the code or add any files to the project category.

over 4 years ago

0 Xun over 4 years ago

TI__Mastermind 18120 points

Hi Jaeyup,

The code will be saved into CCS project regardless USB power is on or not. The USB power is to required to power the control card when you want to flash the program into it.

0 jaeyup jung over 4 years ago in reply to Xun

Intellectual 570 points

Hi, Xun

I have a question.

Even if Phase Shedding is disabled in main.cfg, does it make 3-phase operation in pfc1ph3littpl.c code?

0 Xun over 4 years ago in reply to jaeyup jung

TI__Mastermind 18120 points

Hi Jaeyup,

I have personally test this option. But yes, it should operate only in 3 phase mode once disabled.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

CCS/TIDA-01604: control card