This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

WEBENCH® Tools/TINA-TI: LM3886

Prodigy 40 points

Replies: 5

Views: 93

Part Number: TINA-TI

Tool/software: WEBENCH® Design Tools

Dear Sir.
I am a beginner of TINA-TI, from Japan.
I configured a very simple amplifier of LM3886 on TINA-TI.
However, a error message appeared.

“TLD pin: INP does not match any pin of the macro component. {LM3886}”

I can't understand the meaning of this message, and what should I do?
By the way, there was no problem with other operational amplifiers.
Best regards.

  • Hi,

    Something was wrong with LM3886 model in TINA library.

    Please go http://www.ti.com/product/LM3886/toolssoftware to download LM3886 TINA model. This one can work well. Thanks!

    Regards,

    Hao

  • In reply to Hao(MPAA) Zhang:

    Thank you HAO, quick reply.
    Following your advice, I got 3 files: LM3886.lib, tld, TSM.
    But I'm a TINA-TI beginner, I'm very sorry, so
    I don't know how to compile these files into TINA-TI.
    Could you please instruct step by step?

    Regards,

    Takayuki TANAKA

  • In reply to user6154995:

    Hi,

    You can just download the LM3886 reference design TINA model. You can run the simulation in this reference design. Copy the device "LM3886" and paste it in your design should also work.

    Regards,

    Hao

  • In reply to Hao(MPAA) Zhang:

    Hello! HAO,

    Following your advice, I could download "LM3886 TINA-TI Reference Design (Rev. B)".
    I could run it on TINA-TI, and I could cut and past the LM3886 into another schematic and it worked fine.
    However, the high frequency stability of the copied LM3886 is more abnormally stable than the original one, therefore seems incorrect.
    However, I am able to modify the original circuit and simulate it, so I solved this issue for the time being.
    If there is a better way, please tell me.

    Thank you very much,

    Takayuki TANAKA

  • In reply to Hao(MPAA) Zhang:

    Hi,Hao,

    I'm very sorry that there was a mistake in my circuit drawing.
    The copied LM3886 worked correctly.
    Thanks to you, this issue have solved.
    Takayuki TANAKA

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.