This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPS560430
Tool/software: WEBENCH® Design Tools
I created a WEBENCH Design using the TPS560430. With the following specs:
- Vin: 16.2V to 19.8V
- Vout: 3.3V
- Iout: 0.5A
I'm getting an efficiency of 81.3% however according to the data sheet (Page 7, Figure 1) I should be getting closer to 85% efficiency. Could you help explain to me why this is the case?
Thank you for the help!
Thanks for reaching us out. Webench uses complex algorithms to estimate the efficiency and other operating values. We try our best to match with bench data with same bill of material (BOM).
In this case, there might be a difference in BOM used in datasheet and Webench. This usually happens when Webench tries to give best possible solutions (considering cost/efficiency/footprint ). If we select different Inductor from alternate parts with lower DCR on Webench, you will find small jump in efficiency.
If my reply answers your question please click the "This resolved my issue" button
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.