WEBENCH® Tools/MMWCAS-RF-EVM: mmwave studio

Khoi Le

Part Number: MMWCAS-RF-EVM
Other Parts Discussed in Thread: MMWCAS-DSP-EVM, , MMWAVE-STUDIO

Tool/software: WEBENCH® Design Tools

Hi, I purchased a MMWCAS-DSP-EVM and MMWCAS-RF-EVM combo recently, and am I trying to get it running.

I followed the mmwavestudio cascade user manual (and even other installation instructions) and have installed (uninstalled, and reinstalled more than once):

(1) mmwave-studio 2.1.1.0 (mmwave_studio_02_01_01_00_win32)

(2) matlab runtime 8.5.1 32 bits (MCR_R2015aSP1_win32_installer)

(3) code composer (CCS10.0.0.00010_win64)

(4) ti-emulation pack (ti_emupack_setup_9.2.0.00002_win_64)

However, I still get the following error on mmWave Studio startup, and do not set the Radar API tab. Can anyone help me.

over 3 years ago

0 Ishita Kochar over 3 years ago

TI__Mastermind 31680 points

Hello Khoi,

Can you delete the RSTD folder (..\AppData\Roaming) and check again?

Regards,

Ishita

0 Khoi Le over 3 years ago in reply to Ishita Kochar

Prodigy 40 points

Hi! Thanks for the reply. I deleted the RSTD folder under \AppData\Roaming but the same message persisted. Also, I have reinstalled mmwavestudio several times and have now upgraded to mmwavestudio version 3.0.0.7 hoping it would resolve this, so far nothing yet.

0 Ishita Kochar over 3 years ago in reply to Khoi Le

TI__Mastermind 31680 points

Hello Khoi,

We haven't seen this error before. It seems like your machine is preventing the installation of some files. Can you try this experiment on a different machine if possible?

Regards,

Ishita

0 Ishita Kochar over 3 years ago in reply to Ishita Kochar

TI__Mastermind 31680 points

Hello Khoi,

Due to no response, I'm closing this thread. If you still face any issues, feel free to ask a question.

Regards,

Ishita

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools/MMWCAS-RF-EVM: mmwave studio