Part Number: AM6442 Other Parts Discussed in Thread: TMDS64EVM
TMDS64EVM
Hi TI Experts,
I am starting a new board design and planning to use TI EVM design files for designing my custom board.
https://www.ti.com/tool/TMDS64EVM
Please let me know if you…
Part Number: AM625-Q1 Other Parts Discussed in Thread: SK-AM62-LP Hi TI Experts,
I am starting a new board design and planning to use TI SK design files for designing my custom board.
https://www.ti.com/tool/SK-AM62-LP
Please let me know if you have any…
Part Number: AM625
Hi TI Experts,
I am designing my custom board using TI AM62x family of processors. I have a few queries.
1. I am expecting to not use some of the SOC peripherals. Do you have a recommendation?
2. We have a general recommendation to…
Part Number: DRV8243-Q1 Other Parts Discussed in Thread: DRV8244-Q1 , DRV8143-Q1 , DRV8242-Q1 , DRV8144-Q1 , DRV8245-Q1 , DRV8145-Q1 OLP: Load Monitoring SPEC items interpretation for DRV8242-Q1,DRV8243-Q1,DRV8244-Q1,DRV8245-Q1 and DRV8143-Q1,DRV8144-Q1,DRV8145…
Part Number: AM625 Other Parts Discussed in Thread: SK-AM64B , SK-AM62B
Overview
The UART boot mode available on AM6x processors (and other similar TI devices) is a valuable tool often used during development and board bringup. To load the initial boot…
Part Number: TDP1204
Brief Overview of HDMI PHY:
The HDMI physical layer is composed of 4 high-speed lanes, one Display Data Channel (DDC) which operates with I2C signaling, Hot Plug Detect (HPD) for device detection, Consumer Electronic Control (CEC…
Part Number: DS560DF810 Other Parts Discussed in Thread: DS560DF410 , DS560DF810 and DS560DF410 offer a variety of crosspoint and gearbox modes which can be used for 1:2 fanout, channel crossing, and NRZ/PAM4 modulation conversion. In this thread, I will…
Part Number: TMUX1574
S-parameter (or scatter parameter) models are AC based models used to understand small scale AC performance of devices. They are created by measuring the scattering (reflections and transmissions) of a device based on some stimulus…