Part Number: TUSB8041A 1: Check power on reset sequence waveform for 3.3v ,1/1v and GRSTz pin and see if it meets hub power on reset sequence timing
2: Check voltage on USB_VBUS pin and see if the voltage is around 0.5v
3: Check if the crystal is oscillating…
Part Number: MCU-PLUS-SDK-AM263X
What is the difference between L_RST, G_RST, FSM reset?
What are a warm reset and a cold reset?
What is the SoC Boot Flow for each reset?
Part Number: DS320PR810 Other Parts Discussed in Thread: DS160PR421 , DS160PR1601 , DS160PR410 , DS160PR810 , DS160PR412 , , DS320PR1601 , DS320PR410 , SN75LVPE5412 , SN75LVPE5421 Applicable to all TI PCIe redrivers for Gen 4:
DS160PR410, DS160PR810, DS160PR1601…
Part Number: AM62P
Hi TI Experts,
I am starting a new board design and planning to use TI EVM design files for designing my custom board.
https://www.ti.com/tool/SK-AM62P-LP
Please let me know if you have any recommendations or guidelines to be followed…
Part Number: AM62A7 Other Parts Discussed in Thread: SK-AM62A-LP
Hi TI Experts,
I am starting a new board design and planning to use TI EVM design files for designing my custom board.
https://www.ti.com/tool/SK-AM62A-LP
Please let me know if you have…
Part Number: TUSB8041A Other Parts Discussed in Thread: TUSB8041 , , TUSB8042A , TUSB8043A , TUSB8044A Over the time, TI TUSB804x USB3 hub family has been transitioned from USB3.0 to USB3.1, from TUSB8041 to TUSB8041A/8042A/8043A/8044A.
Here is the summary…
Part Number: TDA4VM As the mosaic node takes in object array as input and does not have vxreplicateNode implemented, how to enable switch channel in this node?