WL1837MODCOM8I: Connecting the WL1837MODCOM8I module to the Jacinto 6 EVM

Francois Charlot

Part Number: WL1837MODCOM8I

Hello,

I have seen in another post (link) we suggest customers use the COM8Q module along with the J6 EVM. But this module is out of stock, and the SATA connector of the J6 EVM gets in the way when trying to connect the WL1837MODCOM8I. Please advise on how to solve this. Thank you.

Best regards,
François.

over 5 years ago

0 S over 5 years ago

TI__Mastermind 35795 points

Hi François,
We will check with marketing regarding availability WL8 COM8Q module and get back to you .

Thanks
Saurabh

0 Yordan Kamenov over 5 years ago in reply to S

TI__Mastermind 42515 points

Hi François,

as the topic is discussed via emails, can we close the thread?

Regards,
Yordan

0 Francois Charlot over 5 years ago in reply to Yordan Kamenov

TI__Mastermind 22997 points

Hi Yordan,

Indeed, let's close this topic. For the sake of the e2e forum readers: the COM8Q module not being available anymore, one has to either remove the SATA connector for the WL1837MODCOM8I to fit, or to change the 100-pin connector for one with a vertical orientation.

THanks,
François.

Other wireless

Other wireless technologies forum

WL1837MODCOM8I: Connecting the WL1837MODCOM8I module to the Jacinto 6 EVM