CC1352R: How can I estimate the bit rate based on the baud rate and others features settled using the SmartRFStudio?

For 2-(G)FSK the bit rate will be the same as the baud rate for non encoded data.

Please elaborate why my answer did not answer your question.

And if I change the frequency, deviation, BW and others withouth using an specific typical configuration?

Still the same answer. If you use 2-GFSK the bitrate on the air will be the programmed bitrate. The frequency, deviation etc do not impact bitrate.

Oh, sorry. Now I got it. That's because I don't see no place to set to use the 2-GFSK in SmartRFStudio.
So, I'll consider that if I first select one typical configuration that uses 2-GFSK even changing the parameters the 2-GFSK keeps, right?
But, if I select another typical configuration (like long range), how could I estimate the bit rate if this is not the same as the baud? I know that the typical configuration title give us the bit rate, but as we change the parameters I believe the bit rate becomes a function of them.
thanks in advance!

Like, look this configuration. Baud rate is not the same as the bit rate.