This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

LAUNCHXL-CC1350: CC1350/CC1310 compatibility with CC1101 and CC1200

Prodigy 60 points

Replies: 11

Views: 233

Part Number: LAUNCHXL-CC1350

  Good morning,

  I have some questions about CC1350/CC1310.

  My company is using CC1101 and CC1200 for custom communications between different self made equipments.

  At this moment we are thinking on changing architecture of the existing products, but, we need to continue communicating with these (in the future) old equipments.  We have started looking for new RF Transceivers, like cc1350/cc1310 with integrated MCU, but, playing with an old CC1101 module, and a LAUNCHXL-CC1350,  using Smart RFStudio 7 to setup the LAUNCHXL-CC1350 board, it has been impossible to get valid information, always, an CRC Error has been detected on Smart RFStudio.

  My question is, CC1350/CC1310 is compatible (from the communications point of view) with CC1101 and CC1200? Or I should continue using CC1101 and CC1200 not to have compatibility with old equipments?

  Thanks a lot.

  Javier.

  • Guru 251940 points

    In reply to Javier Garcia1:

    To ensure that customers gets answers to their question in a timely manner we have dashboards and metrics. Leaving this open for a few weeks will cause this thread to look like we haven't done our part. Pressing "TI thinks resolved" will close it for the time being but you can reopen it by posting a new post within 4 weeks.

     

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.