LAUNCHCC3220MODASF: UniFlash and Gang Image Files

Roman Jordan

Expert 1770 points

Part Number: LAUNCHCC3220MODASF
Other Parts Discussed in Thread: UNIFLASH

Hello all,

is it possible to burn an Gang image file with UinFlash or dslite?

And if so, does anyone know the needed command line?

The Gang Image file is created by UniFlash.

I use UniFlash 5.3.1.

Kind regards,
Roman

over 4 years ago

0 Jesu over 4 years ago

TI__Mastermind 22935 points

Hi Roman,

Please refer to chapter 7 here.

Jesu

0 Roman Jordan over 4 years ago in reply to Jesu

Expert 1770 points

Hi Jesu,

I know this documentation, thank you.
I want flash a already created BIN-File. Without any reference to the individual files of the image. But I didn't found a suitable command for doing this.

Something like dslite --mcu .... <file.BIN>

I only found commands which use the SLI-Images. Thats why I was asking.

Best regards,
Roman

0 Jan D over 4 years ago in reply to Roman Jordan

Guru 73315 points

Hi Roman,

I think this is not possible. In case you have binary file you can use them for direct programming of SPI flash by 3rd party flasher. If you have *.ucf file you can program them via embedded programming (Python script, Uniflash, etc.). And *.sli files are expected for Uniflash as well.

Jan

0 Roman Jordan over 4 years ago in reply to Jan D

Expert 1770 points

Hi Jan,

thank you very much.

I think the same now.

If there is someone in the world who knows how to flash a BIN-Image using UniFlash or dslite, please let me know. ;)

Kind Regards,
Roman

Wi-Fi

Wi-Fi forum

LAUNCHCC3220MODASF: UniFlash and Gang Image Files