LAUNCHXL-CC1352P: ZigBee OTA Server Tool - No Image was found for device

Yasar Arafath

Intellectual 500 points

Part Number: LAUNCHXL-CC1352P
Other Parts Discussed in Thread: Z-STACK

Hi All,

I am checking ZigBee OTA with zc_ota_server and zr_switch_ota.

It is showing the PAN ID in the OTA Server Tool.

If I Click on Broadcast Image Notify/Image Notify it is showing message "No Image Was Found For Device".

Attached the screenshot.

Please clarify on this.

Thanks & Regards,

Yasar Arafath

over 5 years ago

0 YiKai Chen over 5 years ago

Guru 735455 points

Try to refer to dev.ti.com/.../ota_upgrade.html

0 Yasar Arafath over 5 years ago in reply to YiKai Chen

Intellectual 500 points

Hi YKChen,

I started with referring Z-Stack OTA Upgrade procedure. Does Something I am missing out?

I followed the document step by step upto 3.3 Performing an Image Update. After I followed the chapter :If your Ota Server Device is a coordinator, follow these steps.

Thanks & Regards,
Yasar Arafath

0 YiKai Chen over 5 years ago in reply to Yasar Arafath

Guru 735455 points

Is your image version number larger than currnt one?

0 Yasar Arafath over 5 years ago in reply to YiKai Chen

Intellectual 500 points

Hi YK Chen,

Thanks for the clue. Now it is working. Both image versions are same.

I Created the image with running the command "zOtafileGen.exe otaFile_oad.bin <CCS workspace>\otaFiles BEBE 2652 00000002" and imported that file to otaServer tool as mentioned in chapter 2.3.2 OTA Image Converter Command Line Arguments.

Thanks & Regards,
Yasar Arafath

0 Ryan Brown1 over 5 years ago in reply to Yasar Arafath

TI__Guru**** 202256 points

You could also un-check the "Version Check Image File" box in the Options menu: e2e.ti.com/.../2517991

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

LAUNCHXL-CC1352P: ZigBee OTA Server Tool - No Image was found for device