CC2650STK: Source Code Section Which Open Servers and Connect SensorTag to the Network

nedim teklik

Expert 1950 points

Part Number: CC2650STK
Other Parts Discussed in Thread: CC2531, Z-STACK, , CC2531EMK

Hello,

I have BBB+CC2531 as Trust Center-Coordinator and cc2650stk as sensor tag-end device. I use Z-Stack Linux Gateway Desing.

I need the specific source code section which opens servers and make the connection for sensor tag(cc2650stk) to the network.

over 5 years ago

0 YiKai Chen over 5 years ago

Guru 735455 points

TI Z-Stack Linux Home GW reference design provides full source codes.

0 nedim teklik over 5 years ago in reply to YiKai Chen

Expert 1950 points

Hello,
I have the full source code. But I need to know which section provides this function. Then I will examine this section and try to implement my solution.

0 YiKai Chen over 5 years ago in reply to nedim teklik

Guru 735455 points

I can only suggest you to read developer’s guide and trace source codes by yourself.

0 nedim teklik over 5 years ago in reply to YiKai Chen

Expert 1950 points

Thank you.

0 Sean M over 5 years ago in reply to nedim teklik

TI__Intellectual 2780 points

nedim,

While you're running the Gateway servers, you will be able to see the logs of the different functions for which different commands are sent to the various servers up to the ZNP. I suggest you run your commands which you wish to run and then search those commands in the source code to find the particular section you wish to change/implement yourself.

Best,
Sean

0 nedim teklik over 5 years ago in reply to Sean M

Expert 1950 points

First of all thanks for your response,

I guess you mean that I should follow after ./zigbeeHAgw beaglebone command. There is a screenshot for this.

0 Sean M over 5 years ago in reply to nedim teklik

TI__Intellectual 2780 points

Not exactly.

I recommend running a separate terminal window for running the Linux Gateway servers to see all of the communication logs between the servers. So you can run `sudo ~/source/Projects/node/start_gateway.sh &`

Then you can run the zigbeeHAgw in another terminal window to see your GUI in the separate window. Now when you open the network running Finding & Binding, you'll see the logs in the window you ran the 'start_gateway.sh' script.

Best,
Sean

0 nedim teklik over 5 years ago in reply to Sean M

Expert 1950 points

So sorry, I couldn't do that or probably I couldn't understand. There is a screenshot I have attached. Could you please rephrase the process one more last time?

0 Sean M over 5 years ago in reply to nedim teklik

TI__Intellectual 2780 points

Sorry, I was providing you instructions based on the newest Zigbee 3.0 Linux Gateway SDK which was released recently. That's why the paths were incorrect.

On your right screen in your screenshot is the gateway servers running in a separate terminal which is correct.

Now for your original screen you should run your Gateway application which has the interactive UI in the terminal.

Pressing J will start the Find & Bind process and the server logs (your right terminal in your screenshot) will display the logs as well as the Gateway application will show several logs too of which all the different actions are happening.

Then just search through the gateway source code for those particular functions which you wish to perform, such as the 'DevSendIdentifyQueryReq' which is sent form the Sample Application to the Gateway servers.

0 nedim teklik over 5 years ago in reply to Sean M

Expert 1950 points

Hello,
On my application screen there is no Findind&Binding section and When I press J I still can not see the functions like yours(also on logs section at app screen ). So do you suggest me to use the newest version of Linux Desing? If yes I couldn´t find any new version of Z-STACK-LINUX-GATEWAY at this link www.ti.com/.../Z-STACK-ARCHIVE .
1-Could you please send me the link for the new version of Z-Stack Linux Gw
2-I already implemented some solutions on the old version, is this process also suitable for old version which I am using right now?

0 YiKai Chen over 5 years ago in reply to nedim teklik

Guru 735455 points

You can download ZIGBEE-LINUX-SENSOR-TO-CLOUD_1.0.0 from www.ti.com/.../ZIGBEE-LINUX-SENSOR-TO-CLOUD

0 Sean M over 5 years ago in reply to nedim teklik

TI__Intellectual 2780 points

Follow YK's link for downloading and installing the latest Zigbee 3.0 Linux Gateway. This will put you onto using Zigbee 3.0 which is good.

The new version should have pretty much the same implementations as the old version, so there shouldn't be too many hiccups that you encounter along the road. The documentation which is provided within the SDK should be of great help for you. Refer to the
'Z-Stack Linux Gateway User Guide.pdf' for setting up the Zigbee 3.0 Linux Gateway.

Best,
Sean

0 nedim teklik over 5 years ago in reply to YiKai Chen

Expert 1950 points

Thanks a lot

0 nedim teklik over 5 years ago in reply to Sean M

Expert 1950 points

I will follow the process, maybe today I will not have enough time but tomorrow If I will need anything more. I will let you know. Thank you so much for your help so far.

0 nedim teklik over 5 years ago in reply to Sean M

Expert 1950 points

Hello,
1-Can I use Zigbee 3.0 by CC2531emk with BBB like the previous version?
2-Furthermore, Can I sniff the Zigbee 3.0 frames with CC2531emk?
YiKai Chen

0 YiKai Chen over 5 years ago in reply to nedim teklik

Guru 735455 points

1. Yes
2. Yes

0 nedim teklik over 5 years ago in reply to YiKai Chen

Expert 1950 points

I have BBB+cc2531emk and cc2538dk. I can use cc2531+BBB as coordinator. Can I use cc2538dk as a sensor in my network at Linux ZigBee 3.0 Design?

0 YiKai Chen over 5 years ago in reply to nedim teklik

Guru 735455 points

Yes, you can use cc2538dk as a sensor in your network at Linux ZigBee 3.0 Design.

Zigbee & Thread

Zigbee & Thread forum

CC2650STK: Source Code Section Which Open Servers and Connect SensorTag to the Network