LAUNCHXL-CC26X2R1: Responses of Join successful for End-Device

Lawrence Lin

Hi TI team,

I want to know when my End-Devices(zed_Switch) successfully join Coordinator(zc_light), whether I will receive any responses from Coordinator and where I can find these responses in the source code of zed_switch(End-Device). I want to send data in that moment after successfully join Coordinator.

Thanks

over 5 years ago

0 YiKai Chen over 5 years ago

Guru 735455 points

If device joins zigbee network, it will trigger zstackmsg_CmdIDs_DEV_STATE_CHANGE_IND. You can process "case zstackmsg_CmdIDs_DEV_STATE_CHANGE_IND:" in zclSampleSw_processZStackMsgs to do whatever you want.

0 Lawrence Lin over 5 years ago in reply to YiKai Chen

Genius 4755 points

Hi YK,
Noted. I will try it
Thanks

0 Lawrence Lin over 5 years ago in reply to YiKai Chen

Genius 4755 points

Hi YK,
It could work.

Could I ask you another question?
My End-Device already connected to my Coordinator.
I knew if I power cycle(power off and power on) of Coordinator, my End-Device will automatically connect back to Coordinator.
Whether my End-Device will automatically connect back to Coordinator if I power cycle of my End-Device?

Thanks

0 YiKai Chen over 5 years ago in reply to Lawrence Lin

Guru 735455 points

It depends on your application. If your application do beacon requests to join network right after power cycle, it will join automtically.

0 Lawrence Lin over 5 years ago in reply to YiKai Chen

Genius 4755 points

Hi YK,
I think the example code of zed_switch did not send a beacon request to join network after power cycle so that it will not join automatically. Am I right?
I want to know whether the example code of zed_switch use the function of Zstackapi_bdbStartCommissioningReq to send out beacon request??
Thanks

0 YiKai Chen over 5 years ago in reply to Lawrence Lin

Guru 735455 points

Yes, the default example won't do this automatically and you can use API Zstackapi_bdbStartCommissioningReq to do it.

0 Lawrence Lin over 5 years ago in reply to YiKai Chen

Genius 4755 points

Hi YK,
Noted
Thanks

Zigbee & Thread

Zigbee & Thread forum

LAUNCHXL-CC26X2R1: Responses of Join successful for End-Device