CC2640R2F: Porting Guide from SDK 1.00 to SDK 1.35 BLE5

Markel Robregado

Part Number: CC2640R2F
Other Parts Discussed in Thread: BLE-STACK

Hi,

We have a working program running at SDK 1.00. It advertises and we can try out the ble profiles. After porting our code to SDK 1.35, it does not advertise. Are there any guide, tips porting from SDK 1.00 to SDK 1.35?

- kel

over 6 years ago

0 JXS over 6 years ago

TI__Guru** 105180 points

Hello,

If you are using the Bluetooth 4.2 stack (blestack) then you can follow the same porting procedure from SDK 1.00 to SDK 1.30.

Did you check for any task stack overflow? Does the ROV show any issues?

Best wishes

0 Markel Robregado over 6 years ago in reply to JXS

Guru 85685 points

Hi JXS,

Where can I find this "porting procedure from SDK 1.00 to SDK 1.30". At th SDK 1.30 there is only "Porting Instructions from BLE-Stack 3.0.0 to BLE-Stack 3.00.01".

Are these below the docs to read in order to port project from SDK 1.00 to SDK 1.35

1. SDK 1.30 doc Porting Instructions from BLE-Stack 3.0.0 to BLE-Stack 3.00.01
2. SDK 1.35 doc BLE-Stack 3.00.01 to BLE5-Stack 1.00.00.

- kel

0 JXS over 6 years ago in reply to Markel Robregado

TI__Guru** 105180 points

BLE-Stack v3.0.0 is a component of CC2640R2 SDK 1.00 and BLE-Stack v3.0.1 is a component of SDK 1.30/1.35. The porting link is software-dl.ti.com/.../porting-to-newer-stack-versions.html

Best wishes

Bluetooth®︎

Bluetooth forum

CC2640R2F: Porting Guide from SDK 1.00 to SDK 1.35 BLE5