This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Question: How does do Transient Power Measurement with SmartRF Studio and CC1020?

Other Parts Discussed in Thread: CC1020

I am testing the CC1020 for new development and I have a question.

How can I to measurement Transient Power with SmartRF Studio and CC1020?

I have got CC1020EB and CC1020EMX evaluation board.

For a correct measurement is necesary to program the ramp-up and ramp-down.

  • If you have a fast oscilliscope, you can put the RF output from the SMA directly into the scope and measure that way.  Just be sure to set the scope to 50 ohms input and you don't need any other termination.  Digital storage scopes make this easier.

  • Thanks Chris M,
     
    The problem is not how to measurement the Transient Power ,  for a correct measurement is necesary to switch rx/tx the transceiver but programing the correct ramp up  in the CC1020.
    Is possible to do it with the SmartRF Studio?