TI E2E Community
Low Power RF Tools Forum
CCxxxx Evaluation Module
I would like to be able to quickly prototype any of the CC evaluation modules with an external microcontroller of my own choice. Standard 0.1" (breadboard) headers are ideal.
The problem is that almost all of the CC evaluation modules come with the awkward surface mount samtec connectors. Does anyone know if there are adapters available for the CC evaluation modules? Spinning a PCB solely for that purpose seems like an over-do. I appreciate the help.
You could use the SoC Battery Board (SOC_BB) for that purpose. You can plug in any of the CC evaluation modules and get access to the GPIO, be it a transceiver or a System on Chip. The SOC_BB can be rdered from the TI eStore (http://www.ti-estore.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=SOC-BB).
Life saving! Thanks :)
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.