TI E2E Community
Proprietary Sub 1 GHz & SimpliciTI Forum
Simpliciti clocks on CC430 and UART
Im trying to hone my baud rate down on a UART port to 57600. I using a an EM430 with simpliciti 1.1.1 The system I connect to says the current rate is 59210. So my question is what is the best way to hone that down....do I mess with the DCOCLKDIV and hence the SMCLK which is what my UART is sourced to ....or do I play with UCA0BR or UCBRS or UCBRF...... I dont want to mess anything up for Simpliciti...
Any thought out there???
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.