TI E2E Community
Proprietary Sub 1 GHz & SimpliciTI Forum
SimpliciTI colision avoidance algorithm
I'm testing a system that uses the SimpliciTI stack on CC430 and CC1101+MSP430F24xx based devicesin the 433MHz band. The implemented system is a network of unconnected nodes, all end-devices, wherethe majority of the devices, let's call them tags, wake-up periodicaly with a period defined in theinterval 1s to 60s and send a unconected user datagram (UUD) that must be read by the allways ondevices, let's call them gateways.
In this circunstances the RF channel could be prety crouded with up to 100 tags trying to send messages.Another thing is that i'm setting the bit rate to low values of 1.4Kb/s to 38.4Kb/s to improve range.I'm doing some simulation on OMNeT++ with MiXiM to see if the current CCA algorithm holds up, and if noti'm thinking on improving it.
Is SimpliciTI a good choice for this application? Has anyone tested it in a similar environment?
Thanks in advance.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.