DN108 implementation on CC1110

Robbert eigenbrood

Prodigy 10 points

Hi,

Im trying to get aes encryption working with my CC1110 development board.

In the version ive found it says you have to wait until the key is downloaded with a simple

while(!(ENCCS &0x08));

For me this isnt working. Ive read on the forum there is a new version of the document availible.

Where can i get the latest version of the DN108?

Anyone who can tell me more about it?

Thanks,

Robbert Eigenbrood

over 9 years ago

0 Siri over 9 years ago

TI__Guru* 79271 points

The design note was removed as it contains info about AES, and I cannot share it on the web. I am currently checking why this is so, as the design note does not contain any info that is not already in the data sheet. I will also check how I can share this info with you in an e-mail. You will probably need to fill out some forms before you can receive it. I will get back to you as soon as I know more.

Sorry for the inconvenience

Siri

0 ronnym over 9 years ago in reply to Siri

Expert 1835 points

Like everything else that is published on the internet, you can find it in a quick google search.

Ron

0 Siri over 9 years ago in reply to ronnym

TI__Guru* 79271 points

True, but not on a TI site J

I have been put in contact with the people responsible for what we can put on the web and will come back to you as soon as I know how to proceed.

Siri

0 Siri over 9 years ago in reply to Siri

TI__Guru* 79271 points

Good news

We are now allowed to publish the design note. I will review it today (it needs to be changed to a new template), and hopefully it will be out on the web late this week or early next week.

Siri

0 Siri over 9 years ago in reply to Siri

TI__Guru* 79271 points

Here it is:

http://www.ti.com/lit/swra172

Siri

Sub-1 GHz

Sub-1 GHz forum

DN108 implementation on CC1110