CC1121 configuration

Shimon Shamsiyan

Intellectual 630 points

Other Parts Discussed in Thread: CC1121

Hi All,

I'm using the CC1121 chip and I need to configure it as follows:

FM Modulation

Frequency 2.4 KHz.

Deviation 3.4KHz.

I can find how to configure it can someone show me how to configure it as demanded?

10x,

Shimon.

over 8 years ago

0 Joseph Gigi over 8 years ago

TI__Guru* 85400 points

Moving to the appropriate forum

Regards,
Gigi Joseph.

0 TER over 8 years ago in reply to Joseph Gigi

TI__Guru**** 317180 points

Shimon: Have you looked at SmartRF Studio?

0 Shimon Shamsiyan over 8 years ago in reply to TER

Intellectual 630 points

Hi All,

1. Thanks for the above info...

2. What/Where is the appropriate forum?

3. I've installed the program but I haven't found a good ref how to use it ... I'll be very happy.

10x,

Shimon.

0 TER over 8 years ago in reply to Shimon Shamsiyan

TI__Guru**** 317180 points

The post is now moved to the correct forum. Normally you can find the correct forum by typing the part number in the top left box on e2e.ti.com

In SmartRF Studio you have some suggested predefined settings if you select 'expert mode' tab. For 2.4 kbps you can start from the 1.2 kbps and type in the wanted deviation, frequency etc. You can also look at processors.wiki.ti.com/.../Category:WMBUS, N1c settings which is not too far from what you need.

0 Shimon Shamsiyan over 8 years ago in reply to TER

Intellectual 630 points

Hi all,

I'm sorry I can't find the CC1121 configuration...:-(

Can someone help me with it?

10x,

Shimon.

0 TER over 8 years ago in reply to Shimon Shamsiyan

TI__Guru**** 317180 points

Not sure where you are looking, in the sub 1 GHZ tab in SmartRF Studio it's a black square with CC1121 on it, double click.

Sub-1 GHz

Sub-1 GHz forum

CC1121 configuration