Hi,
I am using BBB with TI CC2531 USB dongle and following the instructions provided in "Z-Stack Linux Gateway User Guide BeagleBone Addendum.pdf".
When i execute below command sequence getting TIMEOUT.
Please let me know what might cause this issue.
root@beaglebone:~/z-stack_linux_gateway_arm_binaries_38883/tools# ./sbl_tool.bin ../misc/CC2531-GW-ZNP_38724.bin
***** TI LPRF ZigBee Serial Bootloader Tool for Linux v. 0.83 *****
Executed ./sbl_tool.bin on Jun 6 2014 21:32:15
Requested file file: ../misc/CC2531-GW-ZNP_38724.bin
Serial port not specified. attempting to use /dev/ttyO4
/dev/ttyO4: No such file or directory
/dev/ttyO4 open failed
/dev/ttyO4: No such file or directory
/dev/ttyO4 open failed
root@beaglebone:~/z-stack_linux_gateway_arm_binaries_38883/tools# ./sbl_tool.bin ../misc/CC2531-GW-ZNP_38724.bin usb
***** TI LPRF ZigBee Serial Bootloader Tool for Linux v. 0.83 *****
Executed ./sbl_tool.bin on Jun 6 2014 21:32:15
Requested file file: ../misc/CC2531-GW-ZNP_38724.bin
Using USB transport
Resetting USB connection. It takes a few seconds...
Image size: 239616 bytes
Press [ENTER] any time to abort downloading image.
zbSocProcessRpc: CMD0:21, CMD1:9, not handled
zbSocProcessRpc: CMD0:21, CMD1:9, not handled
-- TIMEOUT --
zbSocProcessRpc: CMD0:21, CMD1:9, not handled
zbSocProcessRpc: CMD0:21, CMD1:9, not handled
-- TIMEOUT --