Set the Event after end device joins

KEERTHI G

Expert 2610 points

Other Parts Discussed in Thread: MSP430F5438A

Hi friends,

I am using zstack sample app in msp430F5438A exp board.

I want to set a event(using osal_set_event()) after end device joins with coordinator.

I don't want to set that event before joins with coordinator.

Which place am i set the event?

Regards,

Keerthi G.

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735455 points

You can set it in ZDO _STATE_CHANGE.

0 KEERTHI G over 9 years ago in reply to YiKai Chen

Expert 2610 points

Hi chen,

Thanks for reply.

Please see the below one.

And tell it is correct?

// Received whenever the device changes state in the network //

case ZDO_STATE_CHANGE:
SampleApp_NwkState = (devStates_t)(MSGpkt->hdr.status);
if ( (SampleApp_NwkState == DEV_ZB_COORD)
|| (SampleApp_NwkState == DEV_ROUTER)
|| (SampleApp_NwkState == DEV_END_DEVICE) )
{
// Read the values.
osal_set_event( SampleApp_TaskID,READ_EVT ); // this is my event
}
else
{
// Device is no longer in the network
}
break;

Regards,

Keerthi G

0 YiKai Chen over 9 years ago in reply to KEERTHI G

Guru 735455 points

Yes, it is correct.

0 KEERTHI G over 9 years ago in reply to YiKai Chen

Expert 2610 points

Hi chen,

Thank you .

Regards,

Keerthi G.

Zigbee & Thread

Zigbee & Thread forum

Set the Event after end device joins