Problem with ZStak ?

If you mean to disable permit join of Zigbee network, you can use API ZDP_MgmtPermitJoinReq() to do it.

Yes I know it. But where does need  in my user application handle the message and what type of message generate OSAL to UserApp when come in join reguest ?

ZDP_MgmtPermitJoinReq() is defined in ZDOApp, can I handle this event in GenericApp_ProcessEvent() ? What is type of event (mean ZDO_CB_MSG, AF_DATA_CONFIRM_CMD ... or what type of it)?

ZDP_MgmtPermitJoinReq is only for disable or enable permit join of Zigbee network. If you want to know a device joins network, you have to watch end node announcement.

Good, how can I use ZDP_MgmtPermitJoinReq in GenericApp and what type of message is need handle it ?

Or need to write myself code to ZDP_MgmtPermitJoinReq ?

I suggest a toggle button to disable/enable permit join by calling API ZDP_MgmtPermitJoinReq()

Toggle button - this is the EndDevice Side. Me need to do on the side of coordinator ?

My suggestion is to implement it on coordinator.

How I must handle join request in GenericApp() ? Join request come in GenericApp_ProcessEvent() ? And want type of this message ?

I don't understand your problem well. Do you mean you want to know a device joins Zigbee network?

No, I can't understand where me need to handling request to join network in my main App (GenericApp) ? All joining messages come in my GenericApp by event ZDO_CB_MSG ?

If - yes, then how me need to handle this messages ?

I suggest you to study Z-Stack Developer's Guide.pdf first.

Okey, its very helped !

Another question: if new device is announcing in a network, can I handle its IEEE or must call ZDP_IEEEAddrReq() ?

And what is type of ZDP_IEEEADDR_REQTYPE_SINGLE and ZDP_IEEEADDR_REQTYPE_EXTENDED, macro ?

This is an enumeration ? I can't find they in documentation ...

When there is end node announcement, the IEEE address is included in the message.

Yes, I know but under some reason in inMsg->srcAddr.addr.extAddr ( zdoIncomingMsg_t *inMsg ) I have:

0x58, 0xB3, 0x2E, 0x02, 0x00, 0x00, 0x00, 0x01 - and the address is always changing ?

Okey, I have understand !!!

I was using ZDO_ParseDeviceAnnce( inMsg,&deviceAnnce ); to handle Mgmt_Permit_Join_req message, that's why its not worked.

By handling of Device_annce message its work good. And how can I to know what device has emitted Mgmt_Permit_Join_req request to me ?

Try to set breakpoint at ZDO_ParseDeviceAnnce() in ZDO_ProcessDeviceAnnce() to check the IEEE address again.

How I can to intercept the joining message ? The code:

dstAddr.addrMode = AddrBroadcast;
dstAddr.addr.shortAddr = NWK_BROADCAST_SHORTADDR_DEVZCZR;
ZDP_MgmtPermitJoinReq(&dstAddr, 0x00, 1, FALSE);

- don't help, and remote device is added to the network then I recieve the message Device_annce.

Device_annce: Is this message generate when device is added by ZDOApp layer ? I want to control all device that is send request to join to network !!! How can I do this ?

1. Parameter 2 of ZDP_MgmtPermitJoinReq means duration of permit join. When you set it to 0, it means you want to disable join.

2. Device announcement means the device has joined the network. There is no way to get the callback event before this from application. You can verify the device after device announcement. If you don't want the device, you can ask it to leave.

2. Device announcement means the device has joined the network. There is no way to get the callback event before this from application. You can verify the device after device announcement. If you don't want the device, you can ask it to leave.

Okey, that understand. Device has joined the network ... then I am thinking: Does need this device in the network or not ... Thank you, very helped !

1. Parameter 2 of ZDP_MgmtPermitJoinReq means duration of permit join. When you set it to 0, it means you want to disable join.

Yes I want disable joining to the network but it is not disabled, I am steel recieving the message Device_annce ? May be need some other paramers to set ?

Do you enable NV_RESTORE on your device? If yes, the network status would be kept and you have to erase it.

In my f8wConfig.cgf I didn't found  NV_RESTORE parameters ?

I set NV_RESTORE macro but steel recieve message Device_annce ... ?!

ZDP_MgmtPermitJoinReq(&dstAddr, 0x00, 1, FALSE);

Please, help !

Try to erase flash on your device and do test again.