TI E2E Community
PurePath Wireless Forum
Compatibility with ETSI EN 300 328 V1.8.0???
Standard ETSI EN 300 328 V1.8.0 has some requirements for adapative frequency hopping.
Is PurePath Wireless compatible with this standard and how?
So far, I have not detected any documents dealing with this.
We designed our protocol for an early draft of the ETSI EN 300 328 V1.8.0 unless there have been some changes we should comply. I believe there is a final draft of ETSI EN 300 328 V1.8.1 now, right? However, we need to analyze it a bit further and will give you an exact answer.
As it is today (ETSI EN 300 328 V1.7.1) we have to comply with the 10dBm/MHz requirement.
In fact a EN300 328 v1.8.1 may be published middle october 2012, and a lot of new specs (Frequency Hopping, LBT CAA, dwell time, ...) may be or not be compatible with the actual PurePath firmware.
Can TI gives an update about this ?
As you probably already know, the EN300 328 v1.8.1 will be applied on 1.1.2015.
Do you have any fresh information about Purepath Wireless compatibility with the new standard?
PS. Adaptation is clearly a system design related item that is the same in all PPW implementations ... so is there really a reason to do the same tests to all designs?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.