TI E2E Community
Bluetooth® Low Energy Forum
bluetooth custom keyboard
I would like to know if I can get some indications on the overall design of a new custom bluetooth keyboard product using the CC2540 IC. Do I need another microcontroller like an MSP430?, it seems like the CC2540 could handle it by itself, Also, is there any reference or example implementation of something similar?.
are you from Spain? The CC2540 contains an 8051 microcontroller so it should be enough for you.
I think there is een a Human Interface Device (HID) design in the Texas INstruments BLE stack, so you are lucky :)
Please click the Verify Answer button on a post if it answers your question! :)
Yea I'm from Spain :). Sadly I realized that I can't use CC2540 since it doesn't support bt < 4.0 / BLE and my host device is bt 2.1. I was looking into MSP430 + CC2560-PAN1325 but it isn't low power (as far as I know) and I don't know if those could be powered by a coin cell. Since it is a keyboard and It doesn't require continuous transmission it looks like that could save a lot of power by using low power modes, but who knows.
The CC2540 looks neat and perfect for this application but I would have to drop support for older devices without BT 4.
I'm in Barcelona.
It is difficult to use classical BT with a 230mAh coin battery :(
Perhaps your best shot would be employing a class 3 transceiver (1mW - 0dBm) but even this way...
Are you totally sure that it isn't possible? I mean, considering the keyboard application and using low power modes, also the fact that the emitting antenna is going to be millimetres away from the receiving one, perhaps the CC2560 can be adjusted to emit using less power.
I'm not saying it is not possible!
I'm saying the battery of the module will not last for long but it really depends strongly on your application.
The module you say is class 2. Its output power is +12dBm (15.8mW). Considering 3V... around 5mA and this would last for... 230mA / 5mAh = around 45 hours in the most PESSIMISTIC case (always transmitting).
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.