• State
  • Locked Locked
  • Replies 5 replies
  • Subscribers 51 subscribers
  • Views 956 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

cc2541 debug flash

Dushyant Singh
Intellectual 345 points
Other Parts Discussed in Thread: CC2541, LM50, TPS62730

hello all

I am working on a project where i designing a PCB board which consists of cc2541 and temp sensor lm50.

I am designing in eagle PCB board......

i have found every product but i can't able to find debug flash pin.

can any one let me know how i will add debug flash pin into my design?

  • 0
    Intellectual 345 points

    anybody is there to help me??

  • 0 in reply to Dushyant Singh
    TI__Genius 9705 points

    Hello Dushyant, 

    Are you referring to the SOC/Debug Flash connector? If yes, the component used on TI EMs is Samtec 10 pins, 2 rows. 1.27mm connector. The part number is FTSH-105-01-F-DH. You can get footprint details from Samtec datasheet to create a component in Eagle PCB design software. 

    Regards,

  • 0 in reply to SVS
    Intellectual 345 points

    Thanks for your reply. Yes, I am refering to that SOC/Debug flash connector.

    I found another one of Samtec TSW-105-02-S-Q which is 0.25 inch.

    Actually I am working on a project in which I have to measure the environments temp. I am using TI's CC2541 soc Bluetooth chip and LM50 temp sensor. I have made PCB board in eagle software. I am using this software for the first time and also I am a new bee in this field. So Can you look at it if I am doing it right or wrong..??

    And one quetion in TI Sensor tag schematic diagrm there is a transformer like strucutre which is connected to pin no 25 and 26 can u tell me whats that since I will also use in my board

    here is my board....if you help me I will be very much thank full to you because I am working alone in this project

    Thank you in advance

  • 0 in reply to Dushyant Singh
    Intellectual 345 points

    and one more thing in place of TPS62730 DC DC convertor I have used another one......because I couldn't find in eagle library......

  • 0 in reply to Dushyant Singh
    Intellectual 345 points

    hello

     here is my new improved PCB design......can now any tell me if I am doing it right or wrong..??

    so i think nobody is there to help me.....

    ok