when I compile cc2640 stack image, I met a error.

Joseph Zhang1

Other Parts Discussed in Thread: CC2640, CC2650

when I compile cc2640 stack image, I met a error:

Error while running C:\Program Files (x86)\Texas Instruments\Boundary\Boundary.exe -chip "CC2650" -prj "iar" -lcf "C:\ti\simplelink\ble_cc26xx_2_00_00_42893\.

could you help me

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735455 points

I suppose you are using windows XP, right? You have to change path settings to C:\Program Files\Texas Instruments\Boundary\Boundary.exe not C:\Program Files (x86)\Texas Instruments\Boundary\Boundary.exe

0 JXS over 9 years ago

TI__Guru** 105180 points

Hello Joseph,

Please see Section 3.12 "Configuration of RAM & Flash boundary using the Boundary Tool" in the CC2640 SW Developer's Guide.

Best wishes

0 Joseph Zhang1 over 9 years ago in reply to JXS

Prodigy 145 points

Hi,

It still didn't solve this problem. I remove the post build command following the developer's guide but it still have this issue. Could you give me some suggestion?thanks,

Joseph Zhang

0 JXS over 9 years ago in reply to Joseph Zhang1

TI__Guru** 105180 points

Hi,

Please attach the full build log (enabled in IAR IDE options). Use rich formatting to attach the file.

Best wishes

0 YiKai Chen over 9 years ago in reply to JXS

Guru 735455 points

Try to following steps:

1. Open "Configure Custom Argument Variables" from IAR->Tools

2. Edit Variable on "BOUNDARY = C:\Program Files (x86)\Texas Instruments\Boundary\"

3. Change it from "BOUNDARY = C:\Program Files (x86)\Texas Instruments\Boundary\" to "BOUNDARY = C:\Program Files\Texas Instruments\Boundary\"

4. Rebuild project.

Bluetooth®︎

Bluetooth forum

when I compile cc2640 stack image, I met a error.