BLE Device Monitor and KeyFobDemo

AlexTim

There is no "Client Characteristic Configuration" and "Characteristic User Description" for Accelerometer Z-Coordinate in the BLE Device Monitor:

over 8 years ago

0 JXS over 8 years ago

TI__Guru** 105180 points

Hello,

What verion of BLE Device Monitor (DM) are you using? I checked the source code for the BLE 1.4.1 keyfob example and the CCC for the z-axis is defined. Do you see it in BTool?

Best wishes

0 AlexTim over 8 years ago in reply to JXS

Expert 1250 points

I'm using version 2.1.0.
Also I can enable/disable notifications for Z-coordinate with BTool and it works.

0 JXS over 8 years ago in reply to AlexTim

TI__Guru** 105180 points

Thanks for letting us know. I will notify the BLE DM team.

Best wishes

0 AlexTim over 8 years ago in reply to JXS

Expert 1250 points

Looks like BLE DM discovers only 16 attributes for each service.
I've just added some new attributes in the KeyFobDemo to control some accelerometer settings, but these attributes are not visible too

0 AlexTim over 8 years ago in reply to JXS

Expert 1250 points

I moved the attributes on another place and now they are visbible, but Z attributes and Y "Characteristic User Description" became not visible.

By the way, I made the change in the "accelerometer.c"

#define SERVAPP_NUM_ATTR_SUPPORTED 22

0 Jomar Hønsi over 8 years ago

TI__Expert 4095 points

Thanks for letting us know.

There is a limitation of showing 16 attributes per service in the current version of the BLE Device monitor (2.1.0). This limit will be increased to 32 for the next release.

0 AlexTim over 8 years ago in reply to Jomar Hønsi

Expert 1250 points

Thanks. Looking forward for the next release!

Bluetooth®︎

Bluetooth forum

BLE Device Monitor and KeyFobDemo