bluetopia stack cc2564

zahiz zloterz

Intellectual 330 points

I am using the SPPDemo from bluetopia

I open a connection send and receive data to android phone.

at the end I close the link

I can't reopen the link need to reset the application

what is the correct sequence to close and reopen an link

thanks

Zahi

over 9 years ago

0 Sundeep Javvaji over 9 years ago

TI__Mastermind 32615 points

Hi,

Do you mean you have run the command "Close", if so it will close the Serial Port Server. You need to reopen the open an Serial Server by calling "Open 1"

0 zahiz zloterz over 9 years ago in reply to Sundeep Javvaji

Intellectual 330 points

Hi
I need is during the program run time to change between BLE and Bluetooth
so I need to close the stack and open the second one
depended on some conditions

thanks

0 Sundeep Javvaji over 9 years ago in reply to zahiz zloterz

TI__Mastermind 32615 points

Hi,

You can use both BLE and BT together. For example if you use SPPLEDemo you can have both SPPLE and SPP connection at the same time.

0 zahiz zloterz over 9 years ago in reply to Sundeep Javvaji

Intellectual 330 points

Hi Thanks

I can use it as it no changes needed?

where can I find a demo for iOS to work with SPPLE

thanks

Zahi

0 Sundeep Javvaji over 9 years ago in reply to zahiz zloterz

TI__Mastermind 32615 points

Hi,

It depends on your requirement. It will work as is for one SPP and one SPPLE connection simultaneously.

Could you try the LightBlue App, some functionality (scans, connects and gets Characteristics) should work.

Bluetooth®︎

Bluetooth forum

bluetopia stack cc2564