• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 16 subscribers
  • Views 466 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Boschnorm 2580 from 20-03-2014

Sonja Radspieler
Prodigy 20 points

Do your RFID parts meet the actual Boschnorm 2580 from 20-03-2014? Espaecially part Texas 45x45 HF+ RI-I11-112A 03

ISO /iEC 15693-2      ISO/IEC 18000-03, 13, 56 MHz
Factory -programmed read - only number: 64 bits
Memory (user programmable) 2048 bits in 64 bitx32 blocks

  • 0
    TI__Guru* 91086 points

    Sonja - 

    Most likely, as this (the Bosch process doc) looks to be internal to Bosch and related to prohibited substances. 

    Here is TI's REACH statement ==> http://www.ti.com/lit/ml/szzq087d/szzq087d.pdf 

    Do you work for Bosch? If so, then you will need to fill out sections of the N2580_declaration and work that with your TI sales representative. This looks to be a customer specific REACH and RoHS type of declaration situation, in which Bosch has their own internal process that must be followed and could not be handled in this Forum alone, especially since it appears the way this works is that a Bosch business unit would request to TI to formally to submit a declaration back to Bosch, referencing the specific part and that specific business unit. 

    here is the latest download version of the Bosch submission spreadsheet to fill out and the various language PDFs that go with it. 

    4265.Bosch_Norm_N_2580.zip

    I think its best if you are Bosch employee to work this one through official channels and not this Forum.

  • 0 in reply to Josh Wyatt
    Prodigy 20 points

    Dear Josh,

    thank you for your answer. I am not a Bosch employee, I work at the Schreiner Group, we deliver to Bosch and were asked to confirm that our parts comply with that Boschnorm 2580.

    But I will try again to find a contact at our direct supplier which is a merchant of TI products, EBV near Munich.

     

  • 0 in reply to Sonja Radspieler
    TI__Guru* 91086 points

    OK - we have a large portion of our group located in our Freising and there is a sales office in Garching as well, both are close to you. if you cannot make headway on a contact, then let me know and i can connect you to someone local to you.