• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 447 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

NFC app. downloading problem

VENKATA SATYANARAYANA SILLA
Genius 4195 points
Other Parts Discussed in Thread: RF430FRL152H

Hi Ti

There is problem while downloading NFC  app from below link through PC

ti.com/RF430-APP

Here is the attachment that appears after clicking on "download app"


Please go through it  and revert the solution as soon as possible......

Thank you...

  • 0
    TI__Mastermind 38620 points

    Hi Venkata,

    Sorry about the problem.  Try right clicking and selecting "save link as" or "save target as" and you can download the apk.  You will need to use an apk loader to install the app on a phone.

  • 0 in reply to Eddie LaCost
    Genius 4195 points

    Hi Eddie,

    Thanks for your Response. I downloaded the apk file and installed it. But there is a problem in the app :

    1. There is no indication of link(with sensor patch) in the app.

    2. The app is suddenly hanging, displaying some message.

    Where can i get the power ratings of the device and also the voltage induced in the NFC communication...... 

    Please revert back as soon as possible...

  • 0 in reply to VENKATA SATYANARAYANA SILLA
    TI__Expert 7820 points
    1. There is no indication of link(with sensor patch) in the app.

    Can you make sure that NFC is turned on in the settings?

    2. The app is suddenly hanging, displaying some message.

    Can you describe or take a screenshot of the error message?

    Where can i get the power ratings of the device and also the voltage induced in the NFC communication......

    The power ratings of the device are in the RF430FRL152H datasheet available here:
    www.ti.com/.../RF430FRL152H;tisearch=Search-EN-Everything

    The direct link for the datasheet:
    www.ti.com/.../rf430frl152h

    See table 5.5 for power consumption during execution and 5.6 for power consumption in sleep.

    The antenna voltage is specified as VDDH, table 5.26. Since most readers vary on the output power, to get the most accurate number, you could take a DMM and measure the VDDH pin when powering the RF430FRL152H with a reader passively.