This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3000 Sensor application

Building configuration: Sensor Application - Debug
Updating build tree...
Linking
Fatal Error[e72]: Segment DATA20_Z must be defined in a segment definition option (-Z, -b or -P)
Error while running Linker

Total number of errors: 1
Total number of warnings: 0

Kindly help me in this regard..

  • Hi jino,

    It looks like this is a question about CC3000 and its code stack rather than MSP430 so I moved it to the CC3000 forum where you will be more likely to be able to get help.

    However, could you please provide some more information about your problem? It will be difficult for us to debug without knowing what IDE and version you are using (CCS, IAR), what board you are using, and what code you are using (can you provide a link?).

    Regards,
    Katie
  • Hi Jino,

    Where are you taking this application from? What version of host driver and Service Pack are you using?

    Regards,
    Raghavendra