• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 39 subscribers
  • Views 748 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Can not Format and Program CC3200, but Can Ger version

XiangBing Qi
Prodigy 215 points
Other Parts Discussed in Thread: CC3200, UNIFLASH

My CC3200 Version is CC3200R1 M2

The log :

[21:31:35] Begin GetVersion operation.
[21:31:35] INFO: > Executing Operation: Connect
[21:31:37] INFO: setting break signal
[21:31:37] INFO: --- please restart the device ---
[21:31:37] INFO: connection succeeded
[21:31:37] INFO: getting storage list
[21:31:37] INFO: > Executing Operation: GetVersion
[21:31:37] INFO: reading version info
[21:31:37] INFO: > Bootloader version: 2.0.3.2
[21:31:37] INFO: > Chipset version: 19
[21:31:37] INFO: > Executing Operation: Disconnect
[21:31:37] Operation GetVersion returned.
[21:41:31] Begin Format operation.
[21:41:31] INFO: > Executing Operation: Connect
[21:41:33] INFO: setting break signal
[21:41:33] INFO: --- please restart the device ---
[21:41:33] INFO: connection succeeded
[21:41:33] INFO: getting storage list
[21:41:33] INFO: > Executing Operation: Init
[21:41:33] INFO: reading version info
[21:41:33] INFO: DEVICE CC3200 ES1.32
[21:41:33] INFO: reading version info
[21:42:35] ERROR: Connection failed after 4 attempts
[21:42:35] FATAL: Error loading the bootloader. Error code: -1
[21:42:35] INFO: > Executing Operation: Disconnect
[21:42:50] Operation Format returned.

  • 0
    TI__Guru 56345 points

    Hi,

    It looks like you can start connecting to the device and then fails to proceed.

    Can you please reply on the followings:

    1) please send me the jumper settings on the board (picture is preffered)
    2) what version of Uniflash are you using? you can see it under help->about
    3) no other application (e.g. terminal emulation) is connected to the same COM port
    4) SOP2 jumper is not connected
    5) J6 and J7 are connecetd as FLASH (and not BP)
    6) the device has been formatted with "secure" and "alert" options unchecked

    Shlomi

  • 0 in reply to Shlomi Itzhak
    TI__Guru 56345 points

    Hi,

    Are you still experiencing issues? if so, can you follow my guidelines and report back?

    If not, let me know so this thread can be closed.

    Thanks,

    Shlomi

  • 0 in reply to Shlomi Itzhak
    TI__Guru 56345 points
    Hi,
    I am closing the thread, if issue still exist please open a new thread and add a link to this one for reference.
    Shlomi