• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 347 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640R2F: SmartRF Studio 7 - Flash Programmer 2: MAC address programming sequence

Venkatadri Shantaram84961
Expert 4500 points
Part Number: CC2640R2F

Hi

For mass production customer will block JTAG access and expose only UART, using SBL we can program it.

But for programming MAC what is the way, flash programmer 2 tool has the MAC programming feature.

Please share some insight about how this is done , if customer want to implement their GUI and use script of SBL or flash programmer 2.

Thanks

Venkat

  • 0
    TI__Guru** 106705 points
    Hi Venkat,

    All the devices come pre-programmed with MAC address(es) that can be used by you for your end product. If you want to use a custom MAC address, you place this in the secondary MAC address area in CCFG. As CCFG is just an area in flash, you program this the same way as any other flash content.

    Regards,
    Fredrik