ECC Uncorrectable error testing.

Ajay Rai

Other Parts Discussed in Thread: CC2640, RF430TAL160H

I want to test the ECC Uncorrectable error. How can I set this error and check whether corresponding interrupt is generated. I am using MSP430 series of controller.

over 7 years ago

0 JXS over 7 years ago

TI__Guru** 105180 points

Hello Ajay,

Is your question about the CC2640 or MSP430?

Best wishes

0 Ajay Rai over 7 years ago in reply to JXS

Intellectual 345 points

It is related to MSP430.

0 JXS over 7 years ago in reply to Ajay Rai

TI__Guru** 105180 points

Moving to MSP forum. For future reference and faster service, you can open MSP430 inquiries directly in the

MSP Low-Power Microcontroller Forum

0 Jace H over 7 years ago in reply to JXS

TI__Guru 56685 points

Ajay,

Which MSP430 are you using?

0 Ajay Rai over 7 years ago in reply to Jace H

Intellectual 345 points

THe controller I am using is RF430TAL160H.
My understanding was that ECC logic is similar across the controller series. I thought there is a generic way to test it.

0 Jace H over 7 years ago in reply to Ajay Rai

TI__Guru 56685 points

Ajay,

this particular part is an NFC MCU actually and operates a little different. I have moved your post tot eh correct forum, and directly notified someone on the NFC to help with your request.

0 Alex K. over 7 years ago in reply to Ajay Rai

TI__Expert 7820 points

Ajay,

I will friend request you to further assist you with this device.

Alex

0 Josh Wyatt over 7 years ago in reply to Jace H

TI__Guru* 90906 points

Ajay -
this is custom and controlled device (not openly available). you would have to be tied into the business unit for this one.
are you working with someone from TI directly already? if so let us know as any discussion of this device on public forum should not be done.

Other wireless

Other wireless technologies forum

ECC Uncorrectable error testing.

MSP Low-Power Microcontroller Forum