• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 189 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IFADCON_TXRX state of CC1200

Nomo
Guru 16800 points
Other Parts Discussed in Thread: CC1200

Hello sirs,

What does the IFADCON_TXRX state mean?
Also, in case CC1200 is in the state, how can I change the state to IDLE?

Best Regards,

Nomoto

  • 0
    TI__Guru* 79361 points

    This is an intermediate state when going from TX to RX.

    An IDLE strobe will always take the chip back to IDLE, but if you are in an FIFO ERROR state you need to do a flush strobe to get your FIFO pointers correct.

    BR

    Siri