Linux/cc1310: Question on Sub-1 GHz Sensor to Cloud Industrial IoT Gateway Reference Design

Patrik Dai Javad

Part Number: CC1310
Other Parts Discussed in Thread: CC1350

Tool/software: Linux

Hi!

Referring to the IoT gateway reference design based on Beaglebone Black and CC1350 launchpads I have installed the SW on the Linux side and the 2 different FWs on the launchpads.

Also I have installed the certificates for the back end.

When trying to run the application I get following error, see screen dump.

Any ideas?

Thanks in advance.

BR, Patrik

over 6 years ago

0 Suyash Jain over 6 years ago

TI__Genius 10650 points

Hi Pratik, can you try using the Processor sdk linux distribution to test. You can download the SDK from: software-dl.ti.com/.../index_FDS.html
And refer to instructions in the design guide to run the examples www.ti.com/.../TIDEP0084

0 Patrik Dai Javad over 6 years ago in reply to Suyash Jain

Prodigy 190 points

Hi,

I have earlier tried the version am335x-evm-linux-04.00.00.04 and now I see that there is a newer version am335x-evm-linux-04.01.00.06 available.

I understand your answer such that I should use the new version instead and that this should resolve the issue.

Please let me try that and come back with follow-up questions if needed.

BR, Patrik

0 Suyash Jain over 6 years ago in reply to Patrik Dai Javad

TI__Genius 10650 points

Let me know if that works for you.

Sub-1 GHz

Sub-1 GHz forum

Linux/cc1310: Question on Sub-1 GHz Sensor to Cloud Industrial IoT Gateway Reference Design