cc1310: cc1310

Nour mohamed

Expert 2875 points

Part Number: CC1310
Other Parts Discussed in Thread: CC1350STK

hi everyone

I'm trying to do a smart e-lock application using cc1310 launchpad and control it wirelessly, how can i implement that?

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735455 points

I suppose you can try to revise collector and sensor example in TI 15.4 Stack to do it.

0 TER over 6 years ago in reply to YiKai Chen

TI__Guru**** 317180 points

Or using the Easylink examples.

It depends a bit what the requirements for the e-lock application is. What is the main reason why you want to do it with sub 1-GHz? If I'm not mistaken BLE is more commonly used for this type of application since you don't normally need to open a door from several meters away. You typically want to be fairly close to the door to be able to open it (or remotely through the internet if you want to let your kid in etc)

0 Nour mohamed over 6 years ago in reply to TER

Expert 2875 points

hello,
thank you for your reply

my application is a simple e-lock that just takes an on/off command, and the protocol i want to use to communicate is 6lowpan, so what do you suggest that will help me in that?

thank you

0 YiKai Chen over 6 years ago in reply to Nour mohamed

Guru 735455 points

Try to refer to sunmaysky.blogspot.tw/.../contiki-subg-hz-6lowpan-on-cc1350.html

0 Nour mohamed over 6 years ago in reply to YiKai Chen

Expert 2875 points

is there any examples that will help me to control it wirelessly ? using my pc or mobile

0 YiKai Chen over 6 years ago in reply to Nour mohamed

Guru 735455 points

You can use cc26xx-web-demo example and COAP client to toggled LED on CC1350STK. I suppose you can use it to toggle elock accordingly.

Sub-1 GHz

Sub-1 GHz forum

cc1310: cc1310