CC1352R: Sigfox and WiSUN support on CC1352R

Nomo

Guru 16800 points

Part Number: CC1352R
Other Parts Discussed in Thread: CC1312R

Hello,

Do you have any plan to release software stack of Sigfox and WiSUN on CC1352R?
If yes, could you share the detail?

Best Regards,
Nomo

over 6 years ago

0 TA12012 over 6 years ago

TI__Mastermind 36375 points

Momo,

We are working on qualifying the Sigfox PHY on CC13x2R devices and expect to have the results by the end of Q2. Then we will work on a release schedule in the second half of 2018.

Our TI-stack is actually Wisun compliant, what is your specific question in regards to Wisun?

Regards,
/TA

0 Nomo over 6 years ago in reply to TA12012

Guru 16800 points

Hello TA-san,

Thank you for your reply.
I can understand the information for Sigfox.

For WiSUN stack, do you release TI-stack which can be applied to CC13x2R?
I think the stack is for CC13x0.
Also, I think TI-stack includes 802.11e/g, but do you have any plan to release the stack other than PHY/MAC layer?

Best Regards,
Nomo

0 Nomo over 6 years ago in reply to TA12012

Guru 16800 points

Hello TA-san,

Have you any updated on my thread?

Best Regards,
Nomo

0 TA12012 over 6 years ago in reply to Nomo

TI__Mastermind 36375 points

Nomo,

Yes, the TI stack has been ported to the CC1312R and is already release publicly. We do support other PHY's than the 802.11e/g PHY's, today we support a 200kbps and a 5kbps (Long Range mode)

Regards,
/TA

0 Nomo over 6 years ago in reply to TA12012

Guru 16800 points

Hello TA-san,

Thank you for your reply.
I can understand about your solution.

Best Regards,
Nomo

Sub-1 GHz

Sub-1 GHz forum

CC1352R: Sigfox and WiSUN support on CC1352R